Resistivity Mini Controller - BL983314

SKU: BL983314-web

As low as $220.00

The BL983314 is a simple to operate resistivity controller designed for ultra pure water, reverse osmosis, and water conditioning applications. The BL983314 resistivity controller is also ideal for continuous monitoring to process solutions. Setpoint and calibration are manually adjusted with a trimmer and the alarm relay allows for simple control

About the BL983314 Resistivity Mini Controllers

  • Fire retardant casing
  • Selectable overdose protection system
  • Splash-resistant cover

 

Readings are automatically temperature compensated with three different coefficients (β=2.4, 3.5 or 4.5 %/°C). The alarm contact can be used for connection to an alarm, pump, solenoid or dosing system.

The relay contact is open when readings are higher than the setpoint, while for measurements lower than setpoint, the relay contact is closed. The hysteresis is typically 0.20 MΩ •cm from the setpoint.

Measurements are displayed on the LCD and the multi-coloured LED continuously indicates if the controller is in measurement, dosing, or alarm mode. Users can choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to need.

The overtime control system advises users when the relay is active for too long, helping to prevent over-dosage.

More Information
SKU BL983314-web
Product Name Resistivity Mini Controller - BL983314
Quote Required Yes
Resistivity Range 0.00 to 19.90 MΩ•cm
Resistivity Resolution 0.10 MΩ•cm
Resistivity Accuracy ±2% F.S.
Resistivity Calibration factory calibrated
Resistivity Temperature Compensation automatic and linear from 5 to 50°C (41 to 122°F)
β=2.4 ; 3.5 ; 4.5 %/°C selectable through jumper on the rear panel
Resistivity Dosing Relay maximum 2A (fuse protected), 250 Vac, 30 Vdc contact closed when measure < setpoint
Resistivity Dosing Set Point adjustable from 0 to 19.90 MΩ•cm
Resistivity Hysteresis Band 0.20 MΩ•cm
Over Dosing Control adjustable, typically from 5 to approximately 30 minutes
Power Consumption 10 VA
Resistivity Probe HI3314 resistivity probe with 2 m (6.6’) cable (included)
Power Supply BL983314-0
Dimensions 83 x 53 x 99 mm (3.3x2.1x3.9”)
Weight BL983314-0
Ordering Information BL983314-0 (12 VDC) and BL983314-1 (115/230V) are supplied with HI3314 resistivity probe with 2 m (6.6’) cable, mounting brackets, transparent cover and instruction manual.
Write Your Own Review
You're reviewing:Resistivity Mini Controller - BL983314
Your Rating